Heater Accessories

Water misses the stones. It happens to everybody, usually around the third ladle, and it lands on the floor under the heater. The SAA00101 is Harvia’s steel catch tray for floor-standing heaters: 17.2 inches wide, 15.2 deep, and nine tenths of an inch tall, so it sits under the base instead of announcing itself. Steel, black, 3.1 pounds. It is the kind of part nobody adds to the first order and most people want by the second winter, so we would rather you saw it now.

A three-sided black steel sheath for the Harvia 36 and 36 Duo. Harvia’s table gives 3.6 in at the side and rear with it fitted against 19.7 in bare, 16.2 in back on each side, the largest saving of any row in Harvia’s WL sheath table. 22.6 x 22.8 x 35.4 in, 20 lb.

A model-specific black steel sheath for the Harvia 20 RS/LS Pro. Harvia’s own safety-distance table drops the side and rear clearance from 11.9 in bare to 2.5 in with the sheath fitted, and asks for 16.7 in at the front instead of 11.9 in. 25.6 x 22.5 x 32.3 in, 18.73 lb, ships with its installation and operation manual.

Wood safety railing for HUUM CLIFF heaters, enclosing 21.45 x 21.45 in around the heater. Eight bolt-on supports clamp around the heater’s ribs and carry a four-sided wood barrier against accidental contact.

The Harvia HL4M Safety Rail provides added protection and sophistication to your sauna. The wood design brings a touch of refinement to the black steel exterior of the heater. This rail will help safeguard you from coming into contact with the hot exterior of the heater.

Large stainless steel through-wall mounting collar for the HUUM HIVE Flow LS stove, adjustable for walls 4 to 6 in thick. For non-combustible walls only. HIVE Flow Mini LS uses the separate small collar.

A 6.6 gal water heater with the smoke pipe running through the tank, and a stone space on the front holding about 33.1 lb of 2–4 in split-face stones. Harvia’s manual gives 19.7 in minimum safety distance for an uncovered pipe and 9.9 in when the radiation protection supplied in the package is used. 14.2 x 14.2 x 35.9 in, 24 lb. Sauna stones sold separately.

Stainless steel reflector panel that hooks onto the side of a HUUM STEEL heater. HUUM says it makes it possible to achieve half smaller safety distances from the walls. Sold as a single panel; reflectors can be connected to each other.

A rustproof steel base, 21.7 x 24.4 in., with legs that adjust from 2.8 to 3.7 in. Narvi’s manuals make a base mandatory in two named cases: a floor of combustible material or a tiled floor, and any floor with underfloor heating pipes or cables beneath the stove. On a sloping floor the adjustable legs are also what levels the stove. 16.5 lb, black, designed and made in Finland.

The shallow rail in Harvia’s Virta family: 22.6 in wide, 17.8 in deep, 3.9 in high, in wood, CE and EAC certified. Harvia’s railing sheet lists the HL3S against the Virta HL70 and HL90, and it is specified ‘for use with Virta HL70/90’. Harvia’s own line is that the wood design ‘will help protect you from coming into contact with the hot exterior of the heater’, that is the whole job. Ships as rail plus installation manual.

Stainless steel embedding flange for the full-size HUUM HIVE electric heater, used when the heater is set partly down into the sauna bench. Measures 22.64 in inside diameter and 28.94 in outside diameter.

Large HUUM protective floor bed for HIVE wood-burning sauna stoves, 23.2 x 23.2 in. Protects combustible flooring and liquid-based underfloor heating below the stove. Not for use with LS models.

The middle rail in Harvia’s Virta family: 22.6 in wide, 20.6 in deep, 3.9 in high, wood, CE and EAC certified. Harvia’s railing sheet lists the HL3M against the Virta HL110, HL70S, HL70SA, HL90S and HL90SA, the 10.5 kW Virta and the steam-equipped Combi models, and it is specified ‘for use with Virta HL110/HL70SA/HL90SA’. Ships as rail plus installation manual.

Small HUUM protective floor bed for HIVE wood-burning sauna stoves, 19.7 x 19.7 in. Protects combustible flooring and liquid-based underfloor heating below the stove. Not for use with LS models.