Sauna Accessories

Check the date on your heater before you buy this one. Every HIVE built since April 2024 already has an Air Tunnel inside it. If yours is older, this is the stainless steel insert that sits down among the stones and gives the heat a channel to climb through: HUUM rates it at a 25 percent shorter heat-up, longer element life, and fewer stones needed to fill the basket. It fits every HIVE and HIVE Mini electric model. A small part that changes how long you wait to get in.

Stainless steel embedding flange for HUUM DROP heaters, for installations where the stove sits partly inside the sauna bench. Covers the cut edges of the platform boards.

The flange is what turns a heater sitting on a bench into a heater built into one. Stainless steel, 19.7 inches across, made for the 6 and 8 kW Cilindro. It shields the surrounding timber from radiant heat, which is what lets the cut-out sit close to the heater body instead of standing off at a safe but ugly distance. The finished detail is a clean surface with a cylinder rising through it.

Dropping a Cilindro through the bench is the detail that makes a sauna look designed rather than assembled. The HPC7 is the stainless steel collar that makes it possible on the 10.5 kW model: it lines the cut-out, shields the surrounding timber from radiant heat, and lets the hole be only slightly larger than the heater itself, so the finished result reads as one continuous surface with a heater rising out of it.

Read this before you order an AutoLeil: the pipe is not in the box. The Saunum automatic water dispensing system needs this pre-bent primary pipe to run, and it is a separate line on the order. Coming pre-bent is the point. It arrives in the shape it needs to be in, which takes the fabrication step out of the install and lets it fit a range of room layouts without anyone cutting and forming steel on site.

When a Harvia Spirit is recessed into a bench, the HSP1 is the stainless flange that finishes the opening. Harvia’s description is that it ‘ensures a neat finish and also acts as a thermal radiation shield for your benches’; Note that it protects the bench structures from water and heat and that the stainless steel is easy to keep clean. It measures 22.44 x 17.32 in, weighs 1.43 lb, and is designed, engineered and made in Finland.

Drip tray for HUUM DROP series heaters. Sits under the heater to catch water running off the stones so it does not pool on the sauna floor.

Floor plate for HUUM HIVE Flow stoves standing on wood or other combustible flooring, 16.5 x 17.7 in with a 0.8 in upturned edge. The manual states it suits all HIVE Flow heaters.

Water misses the stones. It happens to everybody, usually around the third ladle, and it lands on the floor under the heater. The SAA00101 is Harvia’s steel catch tray for floor-standing heaters: 17.2 inches wide, 15.2 deep, and nine tenths of an inch tall, so it sits under the base instead of announcing itself. Steel, black, 3.1 pounds. It is the kind of part nobody adds to the first order and most people want by the second winter, so we would rather you saw it now.

If your ceiling is too low for the heater you want, this is the part that solves it. A 19.7 inch square stainless steel sheet that mounts above the heater and cuts the required safety distance to the ceiling by half. It also takes the moisture, heat and long-term wear that would otherwise land on your ceiling boards directly above the stones, which is the first place a sauna ceiling starts to look tired. Made in Finland.