Harvia
Harvia WL850 Protective Sheath for Harvia 36 and 36 Duo
$531.00A three-sided black steel sheath for the Harvia 36 and 36 Duo. Harvia’s table gives 3.6 in at the side and rear with it fitted against 19.7 in bare, 16.2 in back on each side, the largest saving of any row in Harvia’s WL sheath table. 22.6 x 22.8 x 35.4 in, 20 lb.
Harvia WL750 Protective Sheath for Harvia Pro 26
$531.00A three-sided steel sheath designed and approved for the Harvia Pro 26. Harvia’s sheath table gives 2.9 in at the side and rear with it fitted and a 1.2 in gap behind the panel; the same stove bare needs 14.8 in on the sides and rear. 19.68 x 22.44 x 35.43 in, 19 lb, ships with its installation manual.
Harvia WL650 Protective Sheath for Harvia Pro 20 ES
$531.00A three-sided steel sheath designed and approved for the Harvia 20 ES Pro/S. Harvia’s sheath table gives 2.5 in at the side and rear with it fitted and a 1.2 in gap behind the panel; the same stove bare needs 11.9 in on the sides and rear. 19.68 x 27.95 x 32.28 in, 23 lb, ships with its installation manual.
Harvia WHP-ASSYM Chimney Roof Accessory Kit for Flat Roofs & Barrel Saunas, Stainless or Black
$461.00Complete roof kit for flat roofs and barrel saunas: rain cap, symmetric rain flange and clamp, smoke pipe, lead-through flange, insulation, and protector for Harvia steel chimneys. Stainless or black.
Harvia WHP-AS Chimney Roof Accessory Kit for Tilted Roofs, Stainless Steel
$461.00Complete stainless roof kit for taking a Harvia steel chimney through a pitched roof: rain cap, tilted rain flange and clamp, smoke pipe, lead-through flange, insulation, and protector.
Harvia WHP500 Sauna Wood Stove Chimney Extension, 19.7 in, Stainless Steel
Price range: $428.00 through $456.00This chimney extension is made of a stylish stainless steel and can be installed both indoor and out. The inventive Harvia WHP500 steel chimney extension is designed to prevent movement caused by temperature changes.
Harvia WHP270 Insulated Smoke Damper for Steel Chimneys, Stainless or Black
Price range: $372.00 through $453.00CE-marked insulated damper plate for Harvia WHP steel chimneys. Closes the flue after firing to hold heat in the sauna, ideal for winter use. Stainless (WHP270SP) or black (WHP270SPM).
Harvia WL450 – Protective Shield for M1, M2, M3, and M3 SL
$409.00The Harvia Protective sheath for M1, M2, and M3 wood burning sauna heaters, including SL models. Allows lower clearances and better protection from combustable building materials. A protective shield is almost always a good idea for a safer sauna experience.
Harvia M3 Protective Bedding, Black
$404.00Harvia Protective Bedding Fits Nearly All Harvia Stoves from M1 to Harvia Legend.
Harvia WL200 Protective Sheath for Legend Wood-Burning Stoves
$399.00A 39.4 x 20.5 x 5 in black steel panel that shields a combustible wall from a Legend’s radiant heat. Harvia’s installation-options drawing takes the clearance at the stove body from 9.9 in with a bare smoke pipe down to 1.2 in with a WL200 fitted and a WL300 cover on an insulated Harvia chimney, provided the stones are piled so they cover the stove body and smoke pipe completely. Up to three panels can be joined.
Harvia HL4M
$394.00The Harvia HL4M Safety Rail provides added protection and sophistication to your sauna. The wood design brings a touch of refinement to the black steel exterior of the heater. This rail will help safeguard you from coming into contact with the hot exterior of the heater.
Harvia SASL2M Autodose Design Pipe | Black, Wall-Integrated
$375.75The nicest sauna interiors hide their plumbing. This is the piece that lets an automatic water dosing system feed the stones without a length of tube running down your wall. A black steel pipe just under 24 inches long, fitted with a low-profile nozzle, mounted above the heater and fed through the wall panel from behind. The Autodose unit itself is a separate purchase. This is the part people forget to order, then wish they had, once the panels are up and the wall is closed.
Harvia WL300 Smoke Pipe Cover for Legend Series Wood-Burning Stoves
$372.00Stone-fillable smoke-pipe guard for Harvia Legend wood-burning stoves. When properly filled with about 88 lb of sauna stones, it reduces the required clearance from the WL300 cover to combustible walls and benches to 6.5 in. Adds thermal mass and matches the Legend design. 22.05 in tall; accepts smoke pipe up to 4.53 in.
Harvia WL110 Protective Bedding for Wood Sauna Stoves | 22 x 25 in
$356.00An aluminum-zinc-coated steel plate with adjustable feet that goes under a wood-burning sauna stove. Harvia’s instruction sheet is direct about when it is not optional: “the protective bedding must be used when the stove is installed on e.g. tile floor with a water barrier treatment.” Harvia lists it for its wood-burning stove range with two exceptions, the 20 ES Pro/S and the Linear 22 ES. It measures 22 x 25 in and 2–3 in high, weighs 26.5 lb, and the feet let you level a stove on a floor that slopes to a drain.
Harvia HL3L Safety Rail for Virta Combi HL110S/SA | Wood
$351.00The deep rail in Harvia’s Virta family: 22.6 in wide, 23.5 in deep, 3.9 in high, wood, CE and EAC certified. Harvia’s railing sheet lists the HL3L against the Virta Combi HL110S and HL110SA, and the 10.5 kW Virta Combi we sell is the HL110SA, an exact model-code match rather than a family guess. Ships as rail plus installation manual.
Harvia HL3M Safety Rail for Virta HL110, HL70SA and HL90SA | Wood
$341.00The middle rail in Harvia’s Virta family: 22.6 in wide, 20.6 in deep, 3.9 in high, wood, CE and EAC certified. Harvia’s railing sheet lists the HL3M against the Virta HL110, HL70S, HL70SA, HL90S and HL90SA, the 10.5 kW Virta and the steam-equipped Combi models, and it is specified ‘for use with Virta HL110/HL70SA/HL90SA’. Ships as rail plus installation manual.
Harvia HL3S Safety Rail for Virta HL70 and HL90 | Wood
$330.00The shallow rail in Harvia’s Virta family: 22.6 in wide, 17.8 in deep, 3.9 in high, in wood, CE and EAC certified. Harvia’s railing sheet lists the HL3S against the Virta HL70 and HL90, and it is specified ‘for use with Virta HL70/90’. Harvia’s own line is that the wood design ‘will help protect you from coming into contact with the hot exterior of the heater’, that is the whole job. Ships as rail plus installation manual.
Harvia WHM25 Chimney Vapor Barrier
$300.00Vapor-barrier plate that seals the ceiling penetration around a Harvia WHP steel chimney. Stops moisture from entering the roof structure and cuts heat loss. 50 × 19.7 in plate, 8.3 in opening.
Harvia HPC3 Safety Railing | Cilindro 6 and 8 kW, Heat-Treated Birch
$274.00A Cilindro is a cylinder of hot steel standing at shin height in a small dark room, and the first time somebody stands up too fast next to one they find that out. The HPC3 is Harvia’s own guard for the 6 and 8 kW Cilindro: four heat-treated birch arches held off the heater on stainless steel mounts, 20.1 inches square. It keeps skin off the shell without hiding the heater, and the birch reads as part of the room rather than as safety equipment bolted on.
Harvia HSP3M Safety Railing for Harvia Spirit | Heat-Treated Birch
$267.00A bar of black-painted heat-treated birch on stainless steel brackets that fastens directly to a Harvia Spirit. Harvia’s own line is that the birch surface is always safe to touch. It measures 21.5 x 17.7 x 5.1 in and weighs 4.4 lb. Specified for the Spirit SP60/90.
Harvia WHM24 Rain Collar for Flat Roofs & Barrel Saunas (Symmetric Rain Flange, Black)
$260.00Genuine Harvia (SPWHM24) symmetric rubber rain flange, replacement weather seal for WHP steel chimneys on flat roofs and barrel saunas. Non-returnable replacement part.
Harvia WHM22 Rubber Rain Collar for Tilted Roofs (Rain Flange, Black)
$222.00Genuine Harvia (SPWHM22) tilted rubber rain flange, replacement weather seal for WHP steel chimneys on pitched roofs. Black rubber. Non-returnable replacement part.
Harvia WZ Smoke Pipe, 4.6 in, for Wood-Burning Sauna Stoves (7.9 in, 19.7 in, 3.3 ft)
Price range: $101.00 through $212.00CE-certified 4.6 in (4.5″) Harvia smoke pipe connecting wood-burning sauna stoves to the chimney. Three lengths (7.9 in / 19.7 in / 3.3 ft) in stainless or black steel. Fits all Harvia wood stoves except the Harvia 50.
Harvia HPC2 Embedding Flange | Cilindro 6 and 8 kW, Stainless Steel
$210.00The flange is what turns a heater sitting on a bench into a heater built into one. Stainless steel, 19.7 inches across, made for the 6 and 8 kW Cilindro. It shields the surrounding timber from radiant heat, which is what lets the cut-out sit close to the heater body instead of standing off at a safe but ugly distance. The finished detail is a clean surface with a cylinder rising through it.
Harvia HPC7 Embedding Flange | Cilindro 10.5 kW, Stainless Steel
$204.00Dropping a Cilindro through the bench is the detail that makes a sauna look designed rather than assembled. The HPC7 is the stainless steel collar that makes it possible on the 10.5 kW model: it lines the cut-out, shields the surrounding timber from radiant heat, and lets the hole be only slightly larger than the heater itself, so the finished result reads as one continuous surface with a heater rising out of it.
Harvia WZ115030SP Damper Plate for Wood-Burning Sauna Stoves
$165.00Stainless damper plate for the 4.6 in smoke pipe of Harvia wood-burning stoves. Regulates draft, slows the burn rate, and keeps more heat in the sauna. 13 in section.
Harvia WL300PC Chimney Cover for Cilindro Wood-Burning Stoves, Chrome
$148.00Chrome steel chimney cover for Harvia Cilindro wood-burning stoves. Filled with 4–6″ stones it absorbs radiant heat and considerably reduces required safety distances. 20″ tall, 41.9 lb stone capacity.
Harvia Xenio & Fenix Data-Cable Extension – 65 ft WX319
$144.00Relocate your Harvia Xenio or Fenix control panel up to 65 ft with this plug‑and‑play RJ‑10 extension cable. Genuine Harvia quality ensures reliable connections and supports a maximum total cable length of 80 ft.
Harvia HSP1 Embedding Flange for Harvia Spirit | Stainless Steel
$131.00When a Harvia Spirit is recessed into a bench, the HSP1 is the stainless flange that finishes the opening. Harvia’s description is that it ‘ensures a neat finish and also acts as a thermal radiation shield for your benches’; Note that it protects the bench structures from water and heat and that the stainless steel is easy to keep clean. It measures 22.44 x 17.32 in, weighs 1.43 lb, and is designed, engineered and made in Finland.
Harvia SAA00100 Drip Tray
$105.00Black steel drip tray for wall-mounted sauna heaters. Protects the sauna floor from water, condensation, and stains.
Harvia WZ115155 Wood Stove Pipe Adapter 4.5″ Euro to 6″ USA
$105.00All Harvia wood-burning sauna stoves are equipped with standard European exhaust piping that measures at 4.6 in (4.5″). This adapter is required for North American 6.2 in (6″) piping conversion.
Harvia SAA00101 Sauna Drip Tray | Steel, for Floor-Standing Heaters
$87.00Water misses the stones. It happens to everybody, usually around the third ladle, and it lands on the floor under the heater. The SAA00101 is Harvia’s steel catch tray for floor-standing heaters: 17.2 inches wide, 15.2 deep, and nine tenths of an inch tall, so it sits under the base instead of announcing itself. Steel, black, 3.1 pounds. It is the kind of part nobody adds to the first order and most people want by the second winter, so we would rather you saw it now.
Harvia WZ020115 Lead-Through Flange for Smoke Pipes
$81.00Stainless lead-through flange that collars a 4.6 in Harvia smoke pipe where it passes through a wall or ceiling, blocks smoke leakage, shields against heat, and finishes the penetration.
Harvia WZ115120 Reducing Pipe, 4.6 in, Stainless Steel
$75.00Stainless reducing pipe that joins a smaller pipe to a larger one in the Harvia 4.6 in sauna chimney system, a precise, sealed transition for reliable draft.
Harvia WX237 Temperature Sensor Cable | 30 ft Extension
$57.00The cable that comes in the box is fine until the control panel ends up on the far side of the changing room. This is the 30 foot Harvia sensor extension: colour-coded conductors so an electrician can land them without guessing, and an outer jacket built for the run between a hot room and a dry-side panel. Order it with the heater. Discovering you are eight feet short on install day is a wasted trip for somebody.
Harvia Paraffin Oil For Sauna
$31.00Harvia’s Paraffin Oil is a trusted treatment for interior sauna wood surfaces, most commonly used on benches. Paraffin oil helps reduce moisture and dirt absorption of any wood to enhance the lifespan and protect your investment. Harvia is safe on heat treated and natural woods like alder, aspen, thermo-aspen, thermo-spruce, and western red cedar.
Harvia recommends you protect the benches and other frequently contacted surfaces with paraffin oil 1-3 times a year.
Prebuilt
Sauna Brushes
Vents