The Kaamos 20 is a traditional wood-burning sauna heater that combines reliable performance with practical features:
Technical specifications:
- Sauna room size: 353-706 cubic feet
- Dimensions: 18.9″ W x 19.7″ D x 29.9″ H (adjustable height)
- Weight: 143 lbs (without stones)
- Stone capacity: 132 lbs
- Flue connection: 4.7″ diameter, can connect from top or rear
- Construction: Steel with protective coating
Heating characteristics:
- Continuous burning design for steady, long-lasting heat
- Uses standard firewood (recommended 13″ length, 2″ diameter)
- Initial load: 7.7 lbs firewood
- Subsequent loads: 5.5-6.6 lbs firewood
- Maximum fuel consumption: 15.4 lbs per hour
- Adjustable draft control via ash drawer for heat regulation
Installation features:
- Adjustable legs for leveling and height adjustment
- Minimum 1″ air gap required under heater
- Safety clearances: 11.8″ sides, 19.7″ front, 50″ top, 7.9″ rear
- Can be installed on concrete floor (minimum 2″ thick)
- Requires protective base plate for combustible floors
- Compatible with both masonry and manufactured chimney systems (T600 rated)
Maintenance:
- Regular ash removal required
- Annual chimney cleaning recommended
- Stones should be rearranged yearly and replaced every two years
- Simple exterior cleaning with damp cloth
The Kaamos 20 follows traditional sauna heater design principles with a focus on reliable operation and proper heat distribution. Its straightforward construction and operation make it suitable for both home and light commercial use.