Why Choose Narvi 30?
Pure Finnish Build – Designed, welded, and enamel‑baked in Lappi, Finland—no third‑party factories.
Thick‑Plate Construction – 0.39″ (10 mm) firebox walls shrug off decades of daily firings.
Monster Stone Bed – 143 lbs of rock = massive thermal mass and a gentler, longer wave of steam.
Reverse‑Hinge Door – Field‑switchable in minutes; fits left‑ or right‑hand bench layouts.
Versatile Flue – Collar pivots from top‑vent to rear‑vent so you can hug tight ceilings or tunnel‑feed from another room.
True Serviceability – Grate, ash pan, and secondary air plates are bolt‑on for easy future replacement.
Need bigger? Check the Narvi 50 (50 kW) for rooms up to 2,500 ft³—same DNA, double the firepower.
Installation & Safety Notes
Floor Load: 474 lbs live load; verify joist capacity before placement.
Ventilation: Provide at least one 4″ make‑up air vent low and opposite the stove for proper combustion.
Pre‑Burn: Heat outside once to cure paint—smells less than your first cedar bench.
Always follow local code; hire a certified chimney sweep for final sign‑off.
Operating Highlights
Heat‑Up Time: ~45 minutes to 180 °F with kiln‑dried softwood (one full firebox plus 5 lb top‑off).
Löyly Control: Keep ash drawer open 1 ¼″ during start‑up, then throttle to ½″ for calm, oxygen‑rich flames.
Fuel Efficiency: Optimal burn is 8 lbs of wood per 30 min; do not exceed 10 lb/hr to avoid over‑firing.
Shipping & Delivery
Ships on a custom timber pallet, banded and crated—lift‑gate included in the Lower 48.
Typical transit time: 5–9 business days. Alaska, Hawaii & Canada: call for quote.
Damage‑free guarantee: inspect on arrival, and we handle the paperwork if the freight carrier scuffs your paint.
| Metric | Narvi 30 |
|---|---|
| Output | 24 kW (≈ 82,000 BTU/h) |
| Recommended Room Volume | 706 – 1,236 ft³ |
| Stone Capacity | 143 lbs (4 – 6″) |
| Max Firewood Length / Ø | 19.7″ L × 2″ D logs |
| Stove Dimensions (W × D × H) | 21.1″ × 26.4″ × 37.4″ |
| Weight (empty / with stones) | 331 lbs / 474 lbs |
| Safety Clearances (Unshielded) | Front 19.7″ |
| Flue Collar | 4.7″ Ø, top or rear exit |
| Certifications | CE, EN 15821, T600 flue rated |
Compare Narvi 50 vs. Narvi 30
| Narvi 30 | Narvi 50 | |
|---|---|---|
| Output | 24 kW | 50 kW |
| Room Size | 706–1,236 ft³ | 1,589–2,472 ft³ |
| Stone Capacity | 143 lb | 220 lb |
| Stove Mass | 331 lb | 606 lb |
| Footprint (W × D) | 21 × 26 " | 26 × 34 " |
| Best For | Family Sauna | Lodges, commercial spas |
If your room volume is over 1,250 ft³, the Narvi 50 gives identical build quality with a smaller footprint and fuel bill.
Ready to Fill Your Sauna with Finnish Soul?
Add the Narvi 30 to your cart, choose your stones and chimney kit, and get ready for an epic sauna experience. Questions? Chat with our sauna pros—you can also book a Ben consultation.
Prebuilt
Sauna Brushes
Vents