All configurations
Included with purchase
Door sensor.
Built for these
HUUM UKU Sauna Control | Local & Wi-Fi Packages
The control system this sensor wires into, at main module terminals O1 and O2. See the full product and build your package →
HUUM 75-Foot UKU Extension Cables | Control & Sensor
The SENSOR-75 variation is the long-run cable for the temperature/door-sensor circuit. See the full product and build your package →
What’s included
- Door sensor
- Magnet
What it is
For use with HUUM UKU controls. The door sensor consists of two parts: a sensor and a magnet. This will help with energy costs by not heating the room when the door is open.
It is not an optional extra. Our UKU control listing states plainly that the supplied door sensor is part of the remote-start safety system and should not be omitted or bypassed.
Installation, from the UKU manual
- “The door sensor kit includes a sensor, magnet, and magnet fixing tape.”
- “The length of the cable between the sensor and the main module should not exceed 32 ft.”
- “Install the sensor on the handle side of the door frame, at a maximum height of 16 in from the floor. When installed higher, the temperature may affect the performance of the magnet and the durability of the magnet tape.”
- “It is important to ensure that the door passes directly by the sensor in the door.”
- “Use a 13/64 in diameter drill when installing a door sensor recessed in the door frame.”
- “Connect the cable to terminals O1 and O2 in the main module.”
- “When closing the door, the sensor and the magnet should remain slightly displaced, and the distance between them should not exceed 13/32 in.”
Glass-front sauna rooms
Where the front of the room is a full glass door in a metal jamb, tucking the sensor in near the floor and running it through the jamb can be difficult. A practical alternative is the first-tier bench, below the hinge cover, as an easier location.
Checking it works
The manual’s test: close the door, start heating, then open the door. “The relays should disconnect within 5-10 seconds and the message ‘Door open’ appears on the screen. Close the door. The relays activate again, the message disappears and heating continues.”
Specifications
| Part number | SP0032 |
|---|---|
| UPC | 4744103013913 |
| Assembled dimensions | 5 in x 4 in x 1 in |
| Weight | 0.05 lb |
| Main module terminals | O1 and O2 |
| Listings | SGS |
To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Often bought with the HUUM UKU Sauna Control | Local & Wi-Fi Packages
What customers building this room most often add alongside it.
Prebuilt
Sauna Brushes
Vents