PROSAUNAS Alder 2X2 VA Outside Corner Trim – Sauna Wood

If your sauna has a peninsula bench or a partial wall, the outside corner is the first thing you see and the first thing someone reaches for. A raw edge there sticks out. The VA outside corner trim is the clean answer.

At 1.1" x 1.1" with an angle moulding profile, the VA trim wraps outside corner edges where cladding terminates and gives the edge a finished, intentional look. It’s the same section as the 2×2 S4SEE moulding, which makes it easy to carry the same profile around the whole room. Natural alder, milled in Estonia by ProSaunas, E1 certified, with the same warm reddish-brown and fine grain as every other piece in the alder family.

Why Alder

Outside corners in a sauna get touched: someone grabs the edge on the way to the bench, brushes it walking past. Alder handles that contact well for the same reasons it handles bench use: no resin, no splinters, stays cool. The 1.1" section is thick enough to take some handling without flexing. The same softness that applies to all natural alder applies here: this is not a hardwood, and a sharp enough impact will dent it. It’s a finishing trim piece, not a bumper rail. For everyday contact it holds up fine. For high-traffic commercial corners, something harder or thermally modified would last longer.

Specifications

• SKU: PS-ALDER-2X2-OUTSIDE-CORNER-TRIM-VA
• Species: European Alder (natural)
• Profile: VA outside corner trim, angle moulding
• Thickness: 1.1"
• Width: 1.1"
• Available lengths: 1 ft, 8 ft
• Price: $3.07 per linear foot
• Made in Estonia by ProSaunas
• E1 certified, ultra-low emissions

Where it goes

Outside corners where cladded surfaces terminate: partial walls, peninsula benches, any exposed vertical edge in a clad sauna room. Run it full height from floor to ceiling for a clean line. Pairs with the SI inside corner trim, UK door trim, and 2×2 S4SEE moulding to complete the alder trim package. The matched section to the 2×2 moulding makes the two interchangeable visually if you want a consistent profile throughout.

Shipping and samples

Sold by the linear foot. Flat $795 freight to the continental US, or free with a heater order. Free samples available: text your name and address to (844) 565-1113.

Call Ben² at (844) 565-1113 if you’d like to talk through the board count before you order.

Planning guides: Choosing sauna wood · Sauna vapor barrier guide