EE8G dimensions and seating
The EE8G is one of our favorite saunas for conversation. Opposing upper benches let friends face each other, with room between them to sit without crowding knees. Its nearly 7 ft 7 in barrel diameter makes a meaningful difference to the space around you.
For a quieter session, two people can lie back at the same time, one on each side. Each bench is just under 5 ft 11 in long and about 20 in deep. It’s still comfortable for taller folks who don’t mind putting their knees up when lying flat. The flat central floor gives you space to stand and stretch between rounds, keeping clear of the heater.
Upper seating lifts you into the warmer part of the sauna; lower foot support keeps your feet off the floor. The glass front keeps the view part of the experience.

- Seated capacity
- 6 people
- Exterior · W × D × H
- 90.9 × 78.7 × 94.9 in
- Inside, across × front to back
- 7 ft 3 in × 5 ft 10¾ in
- Each upper bench
- 5 ft 10½ in long, about 20 in deep
Will you fit lying down?
Each bench is just under 5 ft 11 in long. Enter your height to see how you’ll fit.
At 5 ft 10 in, you can lie flat with about 1 in to spare.
Why we use thermally modified wood
We used to sell less expensive, conventional-wood sauna kits. Selling and supporting them taught us a hard lesson: repeated swelling and shrinking can work a barrel’s joints apart. A couple of years later, an owner may think the heater is broken because the sauna no longer heats the way it did. Sometimes the real problem is heat escaping through gaps and cracks in the shell.
That experience is why we insist on thermally modified wood for the barrel saunas we sell. Heat treatment changes how the wood responds to moisture, reducing the swelling and shrinking that puts those joints under stress. The EE8G uses thick thermo-spruce staves for the shell and smooth thermo-aspen for the benches and backrests.
The wood still moves a little with the seasons, so the roof, the stainless steel bands, drainage, ventilation and regular care do the rest of the work. Here is how the EE8G handles each.

Thermo-spruce barrel
1.65-inch thermo-spruce staves form the single-wall barrel. Stability helps the fitted boards keep doing their job through changing seasons.
Roof shingles
The included black roof shingles protect the top of the barrel. Assemble and maintain the roof as carefully as the wood beneath it.
Ventilation and drainage
Keep ventilation clear, remove standing water, and follow the care guide. Check bands, fasteners and roof condition as part of regular maintenance.
Natural wood or black exterior
Both EE8G packages use the same thermally modified wood. Black is SaunaShield paint on the outside of the same thermo-spruce.
Natural wood
Choose this for the warm wood appearance. Outdoor exposure changes its color over time; follow the care guide for exterior protection and maintenance.
Black SaunaShield package
Two cans of black SaunaShield exterior paint come in this package, and you or your installer paint the outside during assembly. The inside stays natural wood.
Thermo-aspen benches
Smooth, knot-free wood wherever you sit. The care guide covers the products and method for the benches.
Choose Natural wood kit in the package builder. The care guide covers how to treat the exterior.
Select your finish and heaterEE8G vs. EE6G and CL5G
EE8G: wide opposing seating makes this a strong choice for conversation and groups.
EE8G
Choose the wide barrel, opposing upper benches and open center for sociable sessions. Each bench is just under 5 ft 11 in long.
Check your fit ↑EE6G
Compare the smaller Elegance barrel when available space matters more than the EE8G’s generous diameter. If it’s mostly two of you sitting up, the EE6G may be the better buy, and we’ll tell you so.
Explore EE6G →CL5G
If lying flat with your legs straight matters most, the CL5G’s upper bench is 6 ft 4 in long.
Explore CL5G →Customer photos and reviews

Owners’ installations show what the kit becomes in real gardens and on real decks. One owner’s review describes completing most assembly before finishing the roof and trim, and arranging an electrician separately.
Read the reviews below for individual experiences with assembly, delivery and support.
Read customer reviews ↓Stay somewhere with an EE8G

Treehouse Mountain · Copperhill, Tennessee
An EE8G with a Saunum Air L heater sits on a deck among the trees. The broad glass front makes sense here: the forest stays in view while guests share the upper benches. It is a useful example of pairing the roomy barrel with air blending.
Explore Treehouse Mountain on SaunaShare →
Blue Moon Cottage · Lake Lure, North Carolina
This vacation rental pairs an EE8G with a HUUM HIVE Mini. Compare the setting and installation with Treehouse Mountain to picture how the same sauna can fit a different outdoor space.
Explore Blue Moon Cottage on SaunaShare →Each host sets its own sauna access and stay terms.
What’s included
Shell and weather protection
Thermo-spruce barrel staves, stainless steel bands, supports, glass front and door, black roof shingles and assembly hardware.
Benches, floor and lighting
Thermo-aspen benches and backrests, flat floor kit, ventilation openings and the included LED light bar system.
Added in your package
The heater and controls you pick in the package builder, sized to this barrel. With the Black SaunaShield finish, two cans of exterior paint to apply during assembly.
Planning the heater, power and delivery
Three things decide how smoothly the rest of your project goes: the heater, the power and the delivery. Here is what to line up.
The heater
Electric, wood and propane all work in this barrel when the heater, clearances and ventilation are planned together. For air blending, our Saunum pick is the Air L 13 with the closed basket.
Heater sizing and clearances ↓Power for your heater
An electric heater needs a 240 V circuit sized to its manual; the Air L 13 calls for a 70 A breaker. You get the spec diagram for your package before your electrician shows up.
The crate
The kit ships by freight truck in one crate, 91 × 44 × 47 in and 1,863 lb. Plan where the truck can stop, how the parts reach your pad and who is helping that day. Ask us about holding it at the warehouse until the pad is ready.
Want a second set of eyes on the plan? Book a Ben for a free 30-minute call, and bring your partner, a photo of the spot and rough measurements.
Choosing a heater
Choose a heater package above to see it in 3D Studio. Your finish and heater choices update the 3D view. Rotate the sauna, open the door and look inside.
Simple electric operation
A conventional electric heater suits buyers who want straightforward heat and water on stones. Compare built-in controls with the Wi-Fi control packages above. The wooden heater guard that comes with the EE8G fits around the Harvia KIP 8 kW.
Saunum Air L 13
Our Saunum pick is the Air L 13 closed-basket package with AirIQ Wi-Fi control, six boxes of stones and the Saunum Air L safety rail, in the heater options above. The closed basket fits the EE8G’s center aisle. The stainless open-basket version is wider, so it goes with a different bench layout that we plan with you.
Wood-fired sessions
The EE8G has room for a wood stove. The HUUM HIVE Wood 13 package brings the stove, HUUM’s barrel chimney kit, stones, floor protection and a heat shield, so they go in together as one system.
Why Air L 13, and why the closed basket?
The EE8G’s circular interior is about 245 cu ft before subtracting the floor and benches. Applying Saunum’s 1.5 allowance for uninsulated wood, then conservatively counting the full circular front as glass at 3 cu ft per sq ft, gives about 493 cu ft of effective volume. Our additional 10% outdoor allowance brings that to about 543 cu ft, still within the Air L 13’s 424–565 cu ft range.
The Air L is 18.3 in wide. The closed basket needs 2 in at each side: 22.3 in total, within the EE8G drawing’s roughly 31.5 in center aisle. The open stainless basket needs 8 in at each side: 34.3 in total. That is wider than the standard aisle.
Both versions need 40 in above the stone basket and 20 in clear in front of the fan outlet. The closed basket needs 2 in front clearance; the open basket needs 10 in. Saunum requires the fan outlet’s upper edge below the lower bench edge. The package includes the Saunum Air L safety rail that goes around the heater. The Air L 13 runs on 240 V single-phase power, and its manual specifies a 70 A circuit breaker.
Propane: SaunaLife TITAN SL1
TITAN is a propane option when you want sauna heat without a 240-volt supply or a chimney. A call is recommended to plan the propane setup, including heat loss through the glass, local requirements, ventilation, floor protection and tank placement.
Its rated uninsulated-room range is 140–350 cu ft, compared with the EE8G’s roughly 245 cu ft physical interior. The tank stays outside. TITAN requires a noncombustible base, 50 in above the stone basket, and continuous ventilation with at least 54 sq in of free intake area and 39 sq in of free exhaust area directly outdoors. That ventilation is planned in addition to the EE8G’s standard vents.
Assembling the EE8G
Watch the complete 18-step EE8G assembly film, from the supports and barrel shell to the glass front, seating and roof. Use it alongside the supplied EE8G manual for fastener locations, measurements and installation requirements. Go step by step in the build guide ↓
See the EE8G built and installed
▶ Complete assembly film 18 steps · 7:41
▶ EE8G with Saunum Air L 10, finished install 1½ minutesPrepare the site
Start with a level, stable supporting base, drainage and access for unloading and moving the kit. A level base is also what lets the door close evenly.
Build with help
Line up a few helpers for the heavy components and the glass. Check the crate against the manual’s parts list, read the manual before you start and keep parts protected while you build.
Bring in an electrician
A qualified electrician installs the supply, heater and controls following their manuals and local code.
Questions about the EE8G
Do you offer installation?
We don’t install saunas ourselves, but we have installers and electricians we’ve worked with before, and we can recommend them in most areas. Send us your ZIP code and we’ll check who’s near you. You hire them directly.
What should I check when the crate arrives?
Photograph the crate before you sign and write any damage on the delivery receipt. When you unpack, lift the shingle bundles and check the parts underneath: one owner’s crate looked fine from outside while two bench boards under the shingles had broken in transit. Check every part against the manual’s parts list before you build, because SaunaLife’s warranty excludes transport damage a visual check would have found before installation. Photograph anything damaged and send it to us.
What comes in the LED light kit?
The EE8G’s lighting kit has a 65-inch LED light bar, its 24 V low-voltage cable and a 2-pin four-way splitter cable. Find the light bar and the splitter cable when you unpack, before the build starts. If either is missing, photograph what came in the box and send it to us.
Which way do the benches and their supports go?
The two upper benches are the same part, and their supports (DET 10a and DET 10b in the manual’s parts list) are a mirrored pair cut to the curve of the barrel. Lay them out against the bench page of the manual (page 18) before you fasten anything. If two supports have the same angle or a bench doesn’t match the drawing, photograph the parts and their labels and send them to us.
The door doesn’t close evenly against its seal. How do I adjust it?
Check that the sauna sits level first: SaunaLife’s manual calls for a stable, level foundation for the door and window to work properly. Then adjust the hinges as the manual’s Door and Window Maintenance section shows (page 27). With metric hex keys in sizes 3 and 5, take off the hinge covers and loosen the fixing screws one turn. Shim the door up if it needs height. To move it left or right, turn the two adjusting screws, one clockwise and the other counterclockwise, then tighten both and the fixing screws. If a gap stays, photograph it and send it to us.
What does my electrician need to know?
An electric heater runs on its own hardwired 240 V circuit. The breaker size comes from the heater’s manual (the Air L 13 calls for 70 A), and your electrician follows that manual and local code for GFCI protection and for where the power box and controls mount. You get the spec diagram for your package before your electrician comes.
Can I have a wood stove, and how does the chimney go through the curved roof?
Yes. The chimney comes in the HUUM HIVE Wood 13 package: HUUM’s barrel chimney kit, made for a curved barrel roof, with stones, floor protection and a heat shield. Plan where the chimney passes through the roof before the shingles go on, and ask us about the layout for your stove.
How do I care for thermally modified wood?
Keep the roof sound, the drainage and vents clear, and follow the care guide below for wood treatment and inspections. Thermal modification cuts down how much the wood swells and shrinks, which keeps the barrel’s joints tight.
What if my sauna stops getting as hot?
Check the door seal and the bands first, since gaps let heat escape, then the vents, your settings and the heater. Keep the vents open and the safety controls as they are, and ask us: we’ll help you find the cause.
Can two tall people lie down at once?
Yes, one on each bench. Each bench is just under 5 ft 11 in long. It’s still comfortable for taller folks who don’t mind putting their knees up when lying flat. If you want your legs straight, the CL5G’s upper bench is 6 ft 4 in long.
Is the heater included?
Yes, as part of your package. Pick the heater and controls in the package builder and they’re added to your sauna kit, with your total shown there. The 3D view shows the heater you pick.
What warranty comes with the EE8G?
SaunaLife warrants the EE8G sauna kit for 5 years from delivery for residential use. Commercial use voids it. Your heater has its own warranty from its maker. The full terms are in the SaunaLife Limited Warranty below.
We’ve already thought of everything
This is the EE8G build guide we made in SaunaDesignPro, recorded the way you’d use it. All 20 steps play in 3D, with the parts, the manual page and a way to reach us on every one.
20 steps, page by page
It starts with the crate on your driveway and a numbered check of every part. The 18 steps from SaunaLife’s EE8G manual are each matched to their page, with the parts and hardware listed and a link straight to that diagram. The light kit has its own step.
Every part, in 3D
Play a step, pause it and turn the model to see exactly where each piece goes. Then switch to the finished sauna or a cutaway.
The tricky parts, called out
Notes where builds slow down: check the glass wall’s orientation before closing the barrel, measure the crown opening before trimming the closure, and fold roof underlayment over both ends before the fascia.
Help on every step
Tap Copy step details and send it to us, and we know the exact step and manual page you’re on. If a band won’t reach, the guide says to stop, photograph it and send it to us before forcing anything. Or call or text (844) 565-1113.
Try the build guide here →Book a Ben for a free 30-minute call →

Prebuilt
Brushes, Whisks and Body Care
Vents


