The wettest square foot in the room
Every traditional sauna has one. It is the floor directly under the heater, where the water that misses the stones goes, along with whatever runs off the rocks after a good löyly. On a floor-standing heater there is no wall to take the splash and no gap to let it dry. The SAA00101 gives that spot a steel floor of its own.
What it is
A black steel drip tray built by Harvia for their floor-standing heaters. It measures 17.2 inches wide by 15.2 inches deep and stands nine tenths of an inch tall, which is low enough to slide under a heater base without changing the way the heater sits or looks. It weighs 3.1 pounds. The black finish is chosen to match Harvia’s heaters and rails rather than stand out against them.
Specifications
- Model: SAA00101
- Construction: steel
- Color: black
- Width: 17.2 in
- Depth: 15.2 in
- Height: 0.9 in
- Weight: 3.1 lb
Warranty
Limited 2 year warranty in consumer use, limited 1 year in commercial use.
Which heaters it goes under
This is the floor version. Harvia also makes a wall version for heaters that hang, and the two are not interchangeable, so match the tray to the way your heater mounts. Among the floor-standing heaters we carry, the ones people pair it with are the Harvia Cilindro and the Harvia Club series. If your heater is wall-mounted, you want the SAA00100 wall tray instead.
Why we stock it
A drip tray is an $87 part that protects a floor you paid a lot more for. We have watched enough sauna floors take four years of splash to think of it as part of the heater order rather than an afterthought. If you are not sure which tray your heater takes, send us the model and we will tell you.
Call Ben² at (844) 565-1113 if you’d like to talk through the order.
Prebuilt
Sauna Brushes
Vents