Ready-to-install sauna bench modules – a quick and easy solution
Step 1: Measure the Space
To determine the required length of the sauna bench module, measure the sauna room where you intend to install it, accounting for a gap of at least 4-5 mm between the bench and the wall at both ends of the bench module.
Step 2: Detach the frontboard from the frame
Loosen the screws that fasten the frontboard of the bench to the frame.
Step 3: Adjust the length of the frame
Unscrew the short piece of wood from one end of the sauna bench frame and attach it in the correct location for the required length of the bench. Then, saw the frame and the frontboard to the correct length. Finally, use the screws that were removed previously to fasten the end piece back onto the newly cut end of the frame.
Step 4: Attach the frontboard to the frame
Attach the frontboard back onto the frame, using the screws that were removed earlier to fasten it.
Step 5: Install the bench supports
Fasten the bench supports to the walls, using a pair of 5 x 100 mm screws for each support. Ensure that for each bench, both supports are installed at the same height from the floor.
The raised parts on the outer edges of the supports enable ventilation between the wall and the sauna bench module.
Step 6: Install the frame
Place the frame of the sauna bench module on the bench supports and attach it to the wall with screws, making sure to fasten the back of the frame to the wall and not just the ends. Use all of the remaining 5 x 100 mm screws; the distance between screws must not exceed 600 mm. Depending on the design of the sauna room, longer screws may be required.
Step 7: Cut the bench grate to size
Use a saw to cut the sauna bench grate to the correct length.
To ensure that the boards are secured together at both ends of the bench grate after cutting, use 4 x 45 mm screws to fasten a new batten to the end that will be cut. Then, use a saw to cut the sauna bench grate to the correct length.
Step 8: Install the bench grate
Place the sauna bench grate onto the frame.
Place the sauna bench grate on the frame, using four 4 x 45 mm screws to fasten it from above. This will prevent the grates from bending.
Step 9: Install a support beneath the bench
It is obligatory to add a wooden support (not included in the sauna bench module package) between the sauna bench and the floor to support the frame. One support, with a minimum cross section of 28 x 42 mm, should be installed in the center of each sauna bench.
Prebuilt
Sauna Brushes
Vents
Reviews
There are no reviews yet